Function Modules - Lenze E94ASHE-Serie Montageanleitung

8 Wiring the device modules

Function modules

8.2 Function modules
Use these modules in slot þ MXI1 or þMXI2 oMMI oMSI.
Digital frequency
Connections
Pos. Description
X9 Input for digital frequency, 9−pole Sub−D plug
X10 Output for digital frequency, 9−pole Sub−D socket
X9
5 9
1 6
SUBD09010
64
Pin Designation Explanation
1 B
2 A
TTL input signal by encoder or encoder simulation
3 A
4 +5 V Regulated voltage supply for encoder
(pin 8 = sense must be used, max. control range 5 ... 9 V)
5 GND −
6 Z
TTL input signal by encoder or encoder simulation
7 Z
8
The function of this cable has to be set in the basic device:
l l
S Sense (sensor lead for voltage regulation, Lenze setting)
l l
Lc Lamp control
l E l Enable
9 B TTL input signal by encoder or encoder simulation
l
E94AYFLF004
EDK94ASH24 DE/EN/FR/ES/IT 5.0