Noise And Vibration; Technical Specifications - Flex CS 62 18.0-EC Bedienungsanleitung

CS 62 18.0-EC

Noise and vibration

The noise and vibration values have been
determined in accordance with EN 62841.
The A evaluated noise level of the power
tool is typically:
Ó Sound pressure level:
Ó Sound power level:
Ó Uncertainty:
Total vibration value:
Ó Emission value:
Ó Uncertainty:
CAUTION!
The indicated measurements refer to new
power tools. Daily use causes the noise
and vibration values to change.
NOTE
The vibration emission level given in this
information sheet has been measured
in accordance with a standardised test
given in EN 62841 and may be used to
compare one tool with another. It may be

Technical specifications

Machine type
Battery
Charging time (Battery 5 Ah)
Idling speed
Saw blade mounting hole
max. saw blade-diameter
max. cutting width
max. blank thickness
max. cutting depth
max. mitre cut
Weight according to "EPTA Procedure 01/2003"
(with battery 5 Ah)
Weight battery
Angle presetting
83 dB(A);
94 dB(A);
K = 3 dB.
2
a < 2.5 m/s
h
2
K = 1.5 m/s
used for a preliminary assessment of
exposure. The declared vibration emission
level represents the main applications of the
tool. However if the tool is used for different
applications, with different accessories
or poorly maintained, the vibration emission
may differ. This may significantly increase
the exposure level over the total working
period. However if the tool is used for
different applications, with different
accessories or poorly maintained, the
vibration emission may differ.
This may significantly decrease the exposure
level over the total working period. Identify
additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep
the hands warm, organisation of work
patterns.
CAUTION!
Wear ear protection at a sound pressure
above 85 dB(A).
Ah
min
r.p.m.
mm
mm
mm
mm
mm
kg
kg
CS 62 18.0-EC
Hand circular saw
5
max. 45
5,000
20
165
1.6
1.0
62
50°
3.9
0.72
22.5°, 45°, 50°
19