Instructions For Use - Flex CS 62 18.0-EC Bedienungsanleitung

CS 62 18.0-EC

Instructions for use

WARNING!
Remove the battery before carrying out any
work on the power tool.
Before switching on the power tool
Unpack power tool and accessories and
check that no parts are missing or damaged.
Attaching or changing the saw blade
NOTE
It is recommended to use only circular saw
blades which FLEX offers for use with this
machine.
- Only use saw blades with a diameter
corresponding with the inscriptions on
the saw.
- Select the correct saw blade for the
material to be sawn.
- Only use saw blades with a speed rating
that is equal to or higher than the speed
specified on the electric tool.
- Only use saw blades specified by the
manufacturer that comply with EN 847-1.
WARNING!
Remove the battery before carrying out any
work on the power tool.
 Press and hold down the spindle lock.
 Loosen clamping screw anti-clockwise
using enclosed hexagon-socket key.
 Unscrew clamping screw (3) and remove
front clamping flange (4).
 Take saw blade (2) downwards out
of the housing.
CAUTION!
- Note installation position of back (R) and
front clamping flange (Q).
- The cutting direction of the teeth (direction
of arrow on the saw blade) and direction-
of-rotation arrow on the housing must
agree.
 Clean rear (5) and front clamping
flange (4) as required.
 Insert saw blade from below into
the housing.
 Attach the front clamping flange (4) and
manually tighten the locking screw (3) in
a clockwise direction.
 Press and hold down the spindle lock.
Tighten clamping screw (3) with hexagon-
socket key.
Dust extractor
WARNING!
Dust released from materials, such as lead
paints, some types of wood, minerals and
metal, may be hazardous to the operator
or people in the vicinity. Inhaling or touching
these dusts may result in respiratory
diseases and/or allergic reactions.
- Ensure the work place is well ventilated!
- If possible, use external dust extraction.
- It is recommended to wear a respirator
mask belonging to filter class P2.
Prevent dust from accumulating at the
workplace. Dust can easily ignite.
21