Milesight MS-C2181-PA Benutzerhandbuch Seite 41

Anzeige
Parameters
Power Line Frequency
Day/Night Mode
Day To Night Value
Night To Day Value
IR Light Sensor Value
Smart IR Mode
Abbildung 4-4-4 Anzeige
Tabelle 4-4-2 Beschreibung der Tasten
60HZ flicker for NTSC mode and 50HZ flicker for PAL mode
There are several parameters such as Exposure Level, Maximum Exposure Time
and IR-CUT Interval, etc, associated with this mode
Night Mode: Shown in live view based on Night Mode settings
Day Mode: Shown in live view based on Day Mode settings
Auto Mode: Shown in live view based on environment, set the sensitivity for
switching Day Mode to Night Mode, or Night Mode to Day Mode
Customize: Shown in live view based on your own settings' time to start/end
Night Mode
This is the sensitivity for switching Day Mode to Night Mode. When IR Light
Sensor Current Value is lower than this value, it will switch Day Mode to Night
Mode
This is the sensitivity for switching Night Mode to Day Mode. When IR Light
Sensor Current Value is higher than this value, it will switch Night Mode to Day
Mode
The current value of the IR light sensor
With the combination of the High Beam and Low Beam, The IR LEDs technology
has been upgraded to provide better image clarity and quality regardless of the
object distance. Also, the Low Beam and High Beam's brightness can be adjusted
manually or automatically on the basis of the Zoom ratio. Moreover, with the IR
Function Introduction
35