Electrical Characteristics - Mitsubishi Electric CITY MULTI PLFY-WP10VFM Installationshandbuch

5. Electrical work
5.7. Switch setting for high ceiling
tion location.
SW21-1 SW21-2
Silent – ON
Standard OFF OFF
High ceiling ON OFF
5.8. Switch setting for i-See sensor
With i-See sensor panel, SW3-4 must be adjusted as a position of i-See sensor. (Refer to page 17.)
SW3-4
Position 1 OFF
Position 3 ON
SW3-5
Draft-less (default) OFF
Downward setting ON

5.10. Electrical characteristics

Model
PLFY-WP15VFM-E
PLFY-WP25VFM-E
PLFY-WP32VFM-E
For PLFY-FM, only the particular outlet can be fixed to certain direction with
the procedures below. Once fixed, only the set outlet is fixed every time air
the remote controller.)
"Address No. of indoor unit" is the number given to each air conditioner.
"Outlet No." is the number given to each outlet of air conditioner.
(Refer to the right.)
Remote controller setting
12
Height
2.5 m
2.7 m : default setting
Power supply
Max.: 264V
Min.: 198V
Downward
Fixed setting
particular direction.
IFM: Indoor Fan Motor
MCA (A)
Electric component box
Outlet No. 4
Outlet No. 3
Note:
The outlet No. is indicated by the number of grooves on both ends of each
air outlet. Set the air direction while checking the information shown on the
remote controller display.
-
Output: Fan motor rated output
IFM
Output (kW) FLA (A)
Outlet No. 1
Outlet No. 2
-