Dzoom Digital Zoom; Negative Negative Image; Mirror Mirror-Inverted Display Of Picture - Monacor TVCCD-1622COL Bedienungsanleitung

EXT. A separate switch allows to select the mode,
see chapter 5.2.3.
AUTO Automatic mode selection by the camera. It is
possible to define the switching conditions in a
submenu. For this purpose, press the button
ENTER.
D#N LEVEL
D#N DURATION
N#D LEVEL
N#D DURATION
PREVIOUS
Fig. 10 Submenu automatic day/night selection
1) In the line D
threshold for changing from day to night
mode between 2 and 10 lux.
2) In the line D
mum time for which the brightness must be
reduced to the given value before the
camera will change to night mode (2 – 15 s).
3) Repeat the settings for changing from night
to day mode in the lines N
N # D DURATION accordingly. The value for
05 LUX
05 SEC
10 LUX
05 SEC
# N LEVEL, adjust the switching
# N DURATION, adjust the mini-
# D LEVEL and
the switching threshold must be at least 5 lux
higher than in the line D
4) After setting, select the line PREVIOUS and
return to the first menu page with the button
ENTER.
DZOOM digital zoom
In this line, define the maximum factor (X2, X4, X8, or X12)
of the digital zoom (see chapter 6.1) or deactivate the digi-
tal zoom (OFF).
negative image
NEGATIVE
With the button or , select normal (OFF) or negative
(ON) picture reproduction.
mirror-inverted display of the picture
MIRROR
Use the button or to select OFF (no mirror-inverted
display of the picture) or ON (mirror-inverted display of the
picture). From this menu line, it is possible to call the
second menu page with the button
GB
# N LEVEL.
.
25