Hippo ZAH01-VS Bedienungsanleitung Seite 6

How to Use the Pulse Vacuum Button (PULSE)
Since the pressure under the normal vacuum function is set to be high, sometimes it is easy to destroy some delicate items by high
pressure in the vacuum bags. In this case, you can use the ''PULSE'' vacuum function to control the vacuum time and pressure, and
prevent crushing delicate items. When packing some juicy foods, you can also use this function and prevent liquid being sucked out.
1. Place the item(s) to be sealed into the pre-cut or custom sized bag. Leave at least 2 inches between the contents and the top of
the bag to allow for bag contraction.
2. Open lid and place the open end of the bag down into the vacuum chamber.
3. Close lid by pressing down on both sides. If the lid cannot be lifted, then you have successfully locked the lid in place.
Press the ''PULSE'' button continually, till it reaches the pressure that you want. You can watch the vacuum bag to decide the
4.
pressure. During this process, you can stop vacuum by stop pressing this button ; and press it again to vacuum again.
When the pressure reaches what it needs, press ''SEAL'' button to start sealing.
5.
6. Once the indicator light has turned off, press the release buttons on both sides of the machine to release the bag.
How to Use the Vacuum Sealer with a Canister
NOTE : Canister is not included, accessory hose may not fit all canister lids.
1. Wipe canister cover, canister base and ensure they are clean and dry.
2. Place food into canister and leave at least one inch of space between food and cover.
3. Place cover onto canister, insert one end of accessory hose into port on appliance. Put the other end onto canister port ; pressing
down firmly to ensure a tight fit.
4. Close lid by pressing down on both sides. If the lid cannot be lifted, then you have successfully locked the lid in place.
To begin the vacuum process, press the ''VACUUM'' button. The unit will continue to vacuum and then seal once air has been
5.
removed.
6. Once the indicator light has turned off, it is safe to remove accessory hose from machine and canister.
Care & Cleaning
1. Always unplug the unit before cleaning.
2. Do not immerse in water.
3. Do not use abrasives to clean the unit.
4. Wipe the outer surface with a soft, damp cloth and soap.
5. To clean the inside of the unit, wipe away any food or liquid with a paper towel.
6. Dry all parts thoroughly before you plug in and operate the unit again.
7. Vacuum chamber may trap liquids that were drawn from the bag ; use a mild dish washing soap and a warm, damp cloth to wipe
away any left behind liquid from the vacuum chamber. Dry thoroughly.
Trouble Shooting
Nothing happens when I press the ''VACUUM'' button:

Make sure the power cord is correctly plugged into the electrical outlet.

Make sure the power cord is not damaged in any way.
 Make sure the electrical outlet is operative by plugging in another appliance. If it's not, please check the circuit breakers or fuses
6