Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
F
ACCESSORY PORT
Allows vacuum packaging with Canisters and Accessories.
Dimensions
G
VACUUM CHAMBER
Voltage and Power
Make sure to place the open end of the bag down into the vacuum chamber for
Vacuum Degree
successful vacuuming.
H
SEALING GASKETS
packaged, plus 2 inches. With a pair of scissors or sharp knife, cut desired bag length from bag roll. Make sure to cut in a straight
line. Plug in power cord.
Open lid. Place one end of cut bag onto sealing strip, don't worry if you accidently place any material onto the gasket area.
2.
3.
Close lid by pressing down on both sides. If the lid cannot be lifted, then you have successfully locked the lid in place.
Now that lid has been locked, press the ''SEAL'' button to create a custom sized bag. The indicator light illuminates during the
4.
seal process.
5.
Once completed the indicator light will turn off; press the release buttons on both sides of the machine, it is now safe to take out
the newly created bag.
6.
The custom sized bag is now ready for vacuum sealing.
CAUTION : Make sure you give the appliance time to cool down. Wait at least 20 seconds between seals. Under very heavy usage,
appliance will shut off automatically to prevent overheating. If it does, wait 25 minutes to allow appliance to cool off.
How to Vacuum Seal with the Vacuum Bags
1.
Place the item(s) to be sealed into the pre-cut or custom sized bag. Leave at least 2 inches between the contents and the top of
the bag to allow for bag contraction.
2.
Open lid and place the open end of the bag down into the vacuum chamber.
3.
Close lid by pressing down on both sides. If the lid cannot be lifted, then you have successfully locked the lid in place.
To begin the vacuum process, press the ''VACUUM'' button. The unit will continue to vacuum and then seal once air has been
4.
removed.
5.
Once the indicator light has turned off, press the release buttons on both sides of the machine to release the bag.
340*150*64mm
220-240V~ 50Hz 175W
0.6~0.8 bar
5
How
to
Make
Custom
Sized Bags
1.
Pull enough bag material to
hold item to be vacuum
Werbung
Inhaltsverzeichnis
