Identification; Installation; Mechanical Mounting - Siko WV36M/SSI Originalmontageanleitung

WV36M/SSI
14

Identification

DANGER
WARNING
CAUTION
CAUTION
Danger to man or machine
Danger to man or machine or damage to plant equipment caused by failure
or malfunctioning of the angle encoder.
` Provide suitable safety installations including protective equipment or
limit switches.
` Put the machine out of operation and protect it against unintended
starting.
Rotating parts
Bruising, rubbing, abrasing, seizing of extremities or clothes by touching
during operation any rotating parts as for example shaft.
` Install protective facilities to prevent people from getting access.
External magnetic fields
Failures and data loss occur if strong magnetic fields influence the internal
measuring system.
` Protect the encoder from impact by external magnets.
3 Identification
Please check the particular type of unit and type number from the identifi-
cation plate. Type number and the corresponding version are indicated in
the delivery documentation.
e. g. -
WV36M/SSI 0023

4 Installation

4.1 Mechanical mounting

Destruction of main bearings
Improper installation (e. g. tension on the shaft) causes additional heat
development and destruction of the absolute encoder in the long term.
` Ensure a low shaft and angle offset between shaft and accommodation
bore by applying appropriate manufacturing methods.
WV36M/SSI · Date 24.08.2016 · Art. No. 85487 · Mod. status 203/16
variant number
type of unit
English