Documentation; Safety Information; Intended Use; Identification Of Dangers And Notes - Siko SGH50 Originalmontageanleitung

SGH50
18

Documentation

DANGER
WARNING
CAUTION
1 Documentation
The following documents describe this product:
• The data sheet describes the technical data, the dimensions, the pin
assignments, the accessories and the order key.
• The mounting instructions describe the mechanical and electrical
installation including all safety-relevant requirements and the associ-
ated technical specifications.
These documents can also be downloaded at
com/p/SGH50".

2 Safety information

2.1 Intended use

The SGH50 wire-actuated encoder is a high-precision measurement sys-
tem. The wire-actuated encoder serves exclusively for the acquisition
of linear distance values. The measured values are transferred to an
upstream signal as an electronic output signal. The wire-actuator is only
intended for use in hydraulic systems applications that are not subject to
special electrical or mechanical safety requirements.
1. Observe all safety instructions contained herein.
2. Arbitrary modifications and changes to this wire-actuated encoder are
forbidden.
3. Observe the prescribed operating and installation conditions.
4. Operate the wire-actuated encoder exclusively within the scope of
technical data and the specified limits (see chapter 9).

2.2 Identification of dangers and notes

Safety notes consist of a signal sign and a signal word.
Danger classes
Immediate danger that may cause irreversible bodily harm resulting in
death, property damage or unplanned device reactions if you disregard
the instructions given.
Danger that may cause serious bodily harm, property damage or
unplanned device reactions if you disregard the instructions given.
Danger that may cause minor injury, property damage or unplanned device
reactions if you disregard the instructions given.
SGH50 · Date 02.09.2019 · Art. No. 89817 · Mod. status 214/19
English
"http://www.siko-global.