Manual Mode - Kopp Free-Control Bedienungsanleitung

GB

Manual mode

Each wireless adapter can be operated
manually.
Press the button to switch the device
6
ON/OFF.
Press the button 6 and hold down to dim.
Display
LED lights up
4
LED goes out 1x
4
LED blinks rapidly
4
LED blinks 3x long
4
LED blinks 2x
4
LED
2
Each wireless adapter.
For the position, see wireless adapter
Function
Programming mode activated for 20 seconds
Positive acknowledgement. Wireless transmitter was
correctly programmed.
Error notification. Attempt to program the same
wireless transmitter several times.
Error notification. Full memory.
Positive acknowledgement. Program memory of the
wireless adapter has been completely deleted.
Field strength detector:
Blinks 0x = no reception
Blinks 1x = bad reception
1
Blinks 2x = fair reception
Blinks 3x = good reception
Blinks 4x = very good reception
6
4
2
59