Kopp Free-control Bedienungsanleitung Seite 56

GB
Fuse replacement
The following wireless adapters with dimmer
function have an additional microfuse:
• DIMMER for conventional transformers
(phase control dimmer)
For this, carefully open the housing, possibly
with the aid of a screwdriver.
Insert new fuse; type T 1.25 A
When replacing fuses, always use the same
type of fuse.
56
5 .
5
Programming procedure
For wireless adapter:
• DIMMER for conventional transformers
(phase control dimmer),
• SWITCH, 3-wire 1-channel
• Connect the wireless adapter to power,
meaning plug into an outlet
• Link the wireless adapter to a wireless
transmitter.
• Press the PROG. button
adapter with the included programming
stylus and hold down approximately 2
seconds until the LED
• The programming mode is now activated
for 20 seconds.
6
4
3
3 of the wireless
4 lights up.