Ace instruments ACE II Basic plus Bedienungsanleitung Seite 11

Technical data*
Sensor Fuel Cell sensor
Accuracy +/- 0.050‰ (per mill) with reference to 0.500‰ at 25°C (per mill =
default setting)
OR +/- 0.005% BAC (Blood Alcohol Concentration)
with reference to 0.050% BAC at 25°C
OR +/- 0.025mg/l with reference to 0.25mg/l at 25°C
Detection Range 0.000 up to 4.000‰ (per mill)
OR 0.000 up to 0.400% BAC (USA)
OR 0.000 up to 2.000mg/L (UK)
Warm-up Time Within max. 30 seconds at 0.5‰, it may vary depending on the meas-
ured value of per mill or % BAC or mg/L
Response Time Within 10 seconds
Dimension 106 x 50 x 20mm (L x W x H)
Weight 100g (battery included)
Power Supply 2 pieces of 1.5V AAA Alkaline batteries (= energy for up to 400 tests)
Working Temperature 0°C up to 40°C
Storage Temperature 0°C up to 50°C
Calibration Every 12 months or after 1,000 tests. For a calibration service you can
send the device to ACE Instruments (see www.alkomat.net).
* The technical data are subject to change without prior notice for functional improvements.
Warranty and liability
The ACE Handels- und Entwicklungs GmbH (ACE Instruments) provides a warranty of two
years after purchase for material and processing errors for the product (see attached warranty
and liability declaration) in all versions and designations; and a warranty of one year for the
sensor. This warranty includes the electronics as well as the casing or sensor without sampling
components. Components that are inevitably destroyed upon effectiveness (such as fuses)
are not part of this warranty. The warranty is valid from the date of delivery or from the date of
first activation (always the shorter period), if not stated otherwise in the accompanying ACE
Instruments product literature.
15
Limitation of warranty and liability
1. PRODUCT DESCRIPTION
ACE Instruments rejects any further expressly stated or implied warranty, including the
marketability and suitability for a determined purpose. This warranty especially excludes
calibration. After changing the sensor, calibration is absolutely necessary. If an exchange of
the sensor or a calibration is required for a product, the user may receive a cost estimate.
Should the user reject the estimate, ACE Instruments will send the product back unrepaired/
not calibrated and the product will be labeled accordingly. Should the product not fulfill the
warranty, the claim of the buyer and the obligations of ACE Instruments are limited exclusively to
the discretion of ACE Instruments for exchange, repair of the affected goods or reimbursement
of the purchasing price for the faulty merchandise.
2. APPLICATION RESTRICTION
ACE Instruments is by any means liable for additional, incidental or consequential damage such
as, among others, lost profit and downtime that result from selling, producing or using products
that are part of this application restriction. This is independent of any claims emanating from, for
instance, contracts, negligence or other culpable actions. The product, which is accompanied
by this warranty and liability declaration (no matter the version or designation), in particular
cannot be used in a legally binding manner to determine one's capability to operate vehicles
or execute action that could lead to personal injury or injury to others under the influence
of alcohol. The thorough check for damage of all products upon receipt, calibration suitable
for the given use by the buyer and the proper use, maintenance and service according to
the instructions of the accompanying ACE Instruments product literature are mandatory
prerequisites of this warranty. Maintenance and service work performed by non-qualified
persons as well as the use of non-approved consumables or spare parts results in the voiding
of this warranty. As for all technically challenging products, it is a fundamental prerequisite and
mandatory for ACE Instruments warranty that all users of these product are familiar with the
properties and restrictions of the devices as stated in the respective literature.
3. ADVICE RESTRICTION
The buyer is solely responsible and confirms that they have checked the intended use and
suitability of purchased goods for any purpose. Between the two parties it is expressly agreed
that all technical or other advice given by ACE Instruments regarding the use of goods or
services is free of charge and made under risk to the buyer exclusively. Therefore, no obligation
or liability can result to ACE Instruments from any recommendation or their consequences.
16