Using The Remote Control; Available Range Of The Remote Control; Inserting The Batteries - SIM2 Multimedia MiCO 40 Bedienungs- Und Wartungsanleitung

Using the Remote Control

Available Range of the Remote Control

The remote control can be used to control the projector within
n
the ranges shown in the illustration.
•
The signal from the remote control
note
reflected by the screen. Remote control
signal may vary according to usage.
When using the remote control:
•
Be sure not to drop it, or expose it to moisture or high
temperature.
•
The remote control may malfunction under a fluorescent
lamp. If that occurs, move the projector away from the
fluorescent lamp.

Inserting the Batteries

The batteries (four "AAA" size) are included in the package.
1
Press down the tab on the cover
and pull the cover towards the
direction of the arrow.
2
insert the included batteries.
Insert the batteries making sure the
polarities correctly match the
marks inside the battery
compartment.
3
insert the lower tab of the cover
into the opening, and press down
the cover until it clicks in place.
can be
23'(7 m)
and
8
23'(7 m)
30°
30°
25°
30°
MICO 40-50-ST
MiCO 50