User Codes - Waeco ASC5500G RPA Bedienungsanleitung

ASC5500G RPA
8.2

User codes

It is possible to protect the air conditioning service station from unauthor-
ised access using personal user codes. When this function is activated,
the system queries the user code after being switched on, and the station
cannot be started without it. Up to 10 different users can be created with
individual codes.
8.2.1 Creating user codes
1. In the basic menu, use the cursor keys  or  to select
"Other selections":
2. Press ENTER to confirm.
3. Use the cursor key  to select "Service" and press ENTER to
confirm:
4. To access the "ADM" administrator menu, enter the password
"9786" and press ENTER to confirm:
5. Enter the administrator code "0000" (default setting) and press
ENTER to confirm:
I
NOTE
For security reasons, a new administrator code must be selected each
time, but not "0000" as this will deactivate the entire function.
Users can be created using the administrator code.
6. Enter the new administrator code:
EN
Short selection
Free selection
Other selections
ENTER-OK
Flushing
Reset scales.
Service.
ENTER-OK STOP-EXIT
Service.
Insert ADM Code
ADM AREA
Insert new code
Operation
----
----
----
101