Troubleshooting - AEG DVD 4615 HC Bedienungsanleitung

Troubleshooting

Before sending the machine to the Customer Services, use the following table to check whether you can rectify the fault
yourself.
Fault
The power supply light
does not light
No image displayed on
screen
No response when pres-
sing button
No sound
05-DVD 4615 HC_GB.indd 69 05-DVD 4615 HC_GB.indd 69
Manual Station Finding
1. Use the SOURCE SELECT (Fig. 3/31) button to select the TUNER mode.
2. Press the „
Press the corresponding button repeatedly until you have found the
desired radio station.
3. In order to store the radio station press the MEMORY/AUDIO (Fig.
3/10) button; "- -" appears in the display.
4. Then enter the desired storage location by means of the Numerical
buttons (Fig. 3/20).
In order to select the stored radio stations press the „
3/23, 25) button or enter the storage location with the Numerical but-
tons (Fig. 3/20).
Possible cause
No power supply
no power supply/ mains switch
switched off
Video cable not correctly
connected
no DVD/CD inserted
DVD/CD not compatible
DVD/CD incorrectly placed in
CD/DVD-tray
CD/DVD is dirty
CD/DVD is damaged
Incorrect settings
The child lock system is acti-
vated
The wrong TV mode has been
selected (no P-SCAN-capable
playback device).
Power supply problem or static
charging of appliance
Audio cable not connected
Amplifi er switched off
Incorrect settings
/ " buttons (Fig. 3/5, 7) to search for a station.
Solution
WARNING: Before troubleshooting, switch the
player off .
Put the mains plug in correctly, if necessary, check the
socket is working with another appliance.
Switch the player on by the mains switch (Fig. 1/15).
WARNING: Before troubleshooting, switch the
player off .
Check the correct fi t of the Video cable „Connecting the
Video cable". Make sure that the jacks are tightly in the
sockets.
Insert a CD/DVD.
Use only compatible media (see „Technical data").
Turn the CD/DVD around.
Clean the CD/DVD.
Use a diff erent CD/DVD.
Check the settings of your DVD-Player.
Deactivate the child lock „Parental".
Press the V-Mode button (Fig. 3/29) to change the TV
mode (interlace).
Switch off the main switch and pull out the mains plug.
Insert the mains plug into the socket and switch the
player on again.
WARNING: Before troubleshooting, switch the
player off .
Video plug for transmission of the Video signal, you must
use and Audio cable in addition to the Video cable ➯
„Connecting the Audio cable".
If you use an amplifi er for Audio output: check whether
the amplifi er is switched on.
Check the settings of your DVD-Player.
English
69
I / I " (Fig.
21.05.2008 8:08:32 Uhr 21.05.2008 8:08:32 Uhr