AEG DVD 4615 HC Bedienungsanleitung Seite 56

English
56
Repeating CD
Stopping repeat
Selecting a section
to be repeated
Using the DVD-menu
Using fast forward or reverse
Enlarging a screen section
Changing the viewing angle
05-DVD 4615 HC_GB.indd 56 05-DVD 4615 HC_GB.indd 56
Keep pressing the REPEAT-button (Fig. 3/17), until the message „All" is
displayed on screen.
Press the REPEAT (Fig. 3/17) repeatedly until the message disappears
from the screen.
You can defi ne a freely selected section to be automatically repeated.
To do this, proceed as follows:
1. Mark the beginning of the section to be repeated. During repetition
press the button A-B (Fig. 3/18) on the remote control once. The
message „A" appears on the screen.
2. Mark the end of the section to be repeated by pressing the A-B-
button on the remote control once again. The message „A B" appears
on the screen. The previously marked section is now repeated.
Press the A-B-button again to stop the repetition.
NOTE: On MP3 CDs the section to be repeated must be within a
track.
Normally each DVD has its own menu. Here you can choose chapters,
make settings, etc. This menu is specifi c for the DVD and can thus not be
explained in detail.
Press the MENU-button (Fig. 3/28) to access the DVD-menu. Use the Cur-
sor Buttons (Fig. 3/9) to navigate in the Menu. Press the ENTER-button
(Fig. 3/27) to confi rm.
If you are in a menu area for direct chapter selection, you can enter the
number of this chapter with the Numerical Buttons (Fig. 3/20) on the
remote control.
The DVD-Player has a fast forward and a fast reverse feature.
1. Press the (Fig. 3/5) or
or fast reverse. The current replay direction and the speed, e.g. „For-
ward x [2]" is now displayed on screen.
2. Press the or -button several times in order to change the
speed. The speed can be accelerated by factor 2, 4, 8, 16 or 32.
3. Press the „ II"-button (Fig. 3/3) to restart the "normal" replay when
the desired section is reached.
You can change the screen section when viewing DVDs, VCDs or images.
Press the ZOOM-button (Fig. 3/34) to change the screen section. Press
the button several times to select the suitable zoom factor or to return to
the original zoom factor.
Some DVDs off er the possibility to select the viewing angle.
Press the ANGLE-button (Fig. 3/11) to change the viewing angle.
NOTE:
If changing the Viewing Angle is not possible, the message „ " will
be displayed.
Repeat pressing the the button to choose a diff erent viewing angle, or to
return to the original viewing angle.
-button (Fig. 3/7) to start fast forward
21.05.2008 8:08:27 Uhr 21.05.2008 8:08:27 Uhr