Connecting The Audio Cable - AEG DVD 4615 HC Bedienungsanleitung

Connecting the Audio cable

Fig. 2/24
Fig. 2/23
Fig. 2/21
05-DVD 4615 HC_GB.indd 51 05-DVD 4615 HC_GB.indd 51
You can choose from three transmission methods for audio signals.
You must generally choose fi rst whether you would like to have the sound
coming from your TV, or through a Stereo or 5.1-Amplifi er. The Audio
cable must then be connected to the TV or an amplifi er accordingly.
NOTE:
If your amplifi er is equipped with a digital output, you should use the
amplifi er. You will experience a much better audio quality, and the
installation is much easier.
Stereo
Connect both Audio cables for the right and the left speakers to your
playback device or your amplifi er.
1. Plug the Audio jacks into the sockets on the back of the player (L1/R1
or L2/R2).
2. Plug the Audio jacks into the corresponding sockets on your playback
device or your amplifi er.
5.1-Audio signal (Connecting the Loudspeakers Supplied)
If you would like to achieve a replay of almost original quality you should
use an Audio output by means of a 5.1-Audio signal.
Here you should use the 6 loudspeakers supplied. Four of these speakers
are placed in the four corners of the room. One speaker is positioned
close to the playback device. The sixth speaker serves the output of very
low tones. With this arrangement of speakers a very natural stereophonic
sound is achieved.
Connect the SPEAKERS OUT connection on the rear of the DVD player to
the corresponding connections on the rear of the individual loudspeakers.
Proceed as follows:
1. Connect the end of the cable to the socket on the rear of the device.
Please ensure the correct confi guration:
- (1) Connection for Subwoofer: Bass
- (2) Connection for Center speaker
- (3) Speaker rear right
- (4) Speaker rear left
- (5) Speaker front right
- (6) Speaker front left
2. Connect the other end of the cable to the corresponding sockets of
your playback device or amplifi er.
Digital
Connect the Coaxial cable for transmission of digital Audio signals to your
playback device or your amplifi er.
1. Plug the Audio jack into the socket on the back of the player.
2. Plug the Audio jack into the corresponding socket on your playback
device or your amplifi er.
English
51
21.05.2008 8:08:25 Uhr 21.05.2008 8:08:25 Uhr