Hendi 239711 Gebrauchsanweisung Seite 11

Error codes
E01 Overheated of the PCB (internal temperature in the housing is too high, clean the filter or the
air inlet or outlet is blocked).
E02 Dry head or the temperature of the glass is too high (empty pot on the stove).
E03 Abnormal input voltage (using a generator or similar in some times).
Cleaning and maintenance
•
Always remove the plug from the socket before cleaning the appliance.
•
Beware: Never immerse the appliance in water or any other liquid!
•
Clean the outside of the appliance with a damp cloth (water with mild detergent).
•
Never use aggressive cleaning agents or abrasives. Do not use any sharp or pointed objects. Do
not use petrol or solvents! Clean with a damp cloth and detergent if necessary. Do not use
abrasive materials.
•
Clean the fan openings with the vacuum cleaner.
•
Clean the glass plate each time after use. This is to prevent any residues from burning onto the
glass plate.
Technical details
AC power supply:
Power consumption
Guarantee
Any defect affecting the functionality of the appliance and which occurs within one year of its
purchase will be repaired or replaced free of charge provided the appliance has been used and
maintained in accordance with the instructions and has not
been abused or used improperly in any way. This is without prejudice to your statutory rights. If the
warranty applies, state where and when the appliance was bought and include proof of purchase
(e.g. till receipt).
In line with our policy of continuous product development we reserve the right to change the product,
its packaging or documentation without notice.
Discarding
When discarding the appliance at the end of its useful life, please observe the regulations and
guidelines in force at that time.
230~240 VAC/50 Hz
3500 W