Identification; Installation; Mechanical Mounting - Siko MSK2000 Originalmontageanleitung

MSK2000
18

Identification

CAUTION
CAUTION
NOTICE
NOTICE
External magnetic fields
Failures and data loss occur if strong magnetic fields influence the internal
measuring system.
` Protect the magnetic sensor from impact by external magnets.
3 Identification
Please check the particular type of unit and type number from the identifi-
cation plate. Type number and the corresponding version are indicated in
the delivery documentation.
e. g. -
MSK2000 0023
Identification by printing on the strip.
e. g.
MBxxxx GEK WT RP NNNNNN

4 Installation

4.1 Mechanical mounting

Magnetic sensor failure
` When mounting pay attention to the IP type of protection (see chap-
ter 9).
` Do not open the sensor yourself.
` Avoid blows to the unit.
` Make any changes to the unit.
` Cable must be provided with strain relief. If necessary use drag chain
or portective sleeve.
Loss of measured values
` The tolerance and gap measures be observed over the whole measur-
ing length.
Exemplary sensor figures are valid for all sensor types unless described
separately.
MSK2000 · Date 07.02.2018 · Art. No. 81962 · Mod. status 44/18
version number
type of unit
batch number
reference point
carrier strip
accuracy
MB type
English