Displays And Buttons; Setting The Time; Setting The Date - Festina IFMOS25 Betriebsanleitung

DISPLAYS AND BUTTONS

Chronograph
second hand
Hour hand
Chronograph
minute hand
second +
1/20 second
chronograph hand
IFM0S25 IFM0S25
24-hour hand
minute hand
Button A
1st Click Position
2nd Click
Position
Normal crown
position
Button B
Calendar
12
IFM0S25

SETTING THE TIME

1. Pull the crown out to the 2nd Click Position so that the second hand stops
at (0) position.
2. Turn the crown to set the hour and minute hands.
3. When the crown is pushed back to the normal position in synchronization
with a time signal, small second hand begins to run.

SETTING THE DATE

1. Pull the crown out to the 1st Click Position.
2. Turn the crown anticlockwise to set the date.
If the date is set between the hours of around 9:00 PM and 1:00 AM, the
*
date may not change on the following day.
3. After the date has been set, push the crown back to the normal position.
13