Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
A) DISPLAYS AND BUTTONS
Hour hand
24 hour hand
Second hand
B) SETTING THE TIME
1. Pull the crown out to the 2nd Click Position.
2. Turn the crown to set hour and minute hands.
C) SETTING THE DATE
* Please do not set the date between 9:00PM and 1:00AM.
1. Pull the crown out to the 1st Click Position.
2. Turn the crown counter-clockwise to set the date.
3. After the date has been set, push the crown back to the normal position.
D) SETTING THE DAY
* Please do not set the day between 11:00PM and 3:00AM.
1. Pull the crown to the 1st Click Position.
2. Turn the crown clockwise very slowly to set the day.
* Please do not stop when the hand is between the day like the following picture.
* If the day hand stops at a position like Figure.1, please turn the crown clockwise very slowly and stop soon after the day
hand positioned like Figure 2.
3. After the day has been set, push the crown back to the normal position.
These specifications might be changed without prior notice.
By virtue of the regulations pursuant to the handling of waste products deriving from electronic and electrical equipment, end of lifecycle watch making
products must be selectively collected for processing. You may therefore dispose of your quartz watch making products at any of our retail outlets or any other
authorized collection point. The selective collection, processing, rating and recycling of these products helps contribute to safeguarding the environment and
protecting our health.
Downloaded from
www.Manualslib.com
I
INSTRUCTION MANUAL
Date hand
JR00
Please do not stop when the day hand is
in this position.
manuals search engine
IFMJR00/10/20
Minute hand
Normal position
1st "CLICK" position
2nd "CLICK" position
Retrogade Day Hand
Please set the day hand just positioned
on the day scale.
JR10
JR20
Werbung
