Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
sufficiently dimensioned and used correctly in accordance with the latest industrial safety regulations (e. g.
BGV C1, BGI 810-3).
Please note: for overhead rigging in public or industrial areas, a series of safety instructions have to be
followed that this manual can only give in part. The operator must therefore inform himself on the current
safety instructions and consider them.
The manufacturer cannot be made liable for damages caused by incorrect installations or insufficient safety
precautions!
Install the safety bond by inserting the quick link in the hole on the bottom of the base. Pull the safety bond
over the trussing system etc. Insert the end in the quick link and tighten the fixation screw.
The maximum drop distance must never exceed 20 cm.
A safety bond which already hold the strain of a crash or which is defective must not be used again.
Before taking into operation for the first time, the installation has to be approved by an expert!
DANGER TO LIFE!
37/56
The Moving-Head can
be placed directly on the
stage floor or rigged in
any
orientation
on
truss without altering its
operation characteristics
(see the drawing).
The
fixture's
enables to be mounted
in two ways.
For
overhead
(mounting height >100
cm), always install an
appropriate safety bond.
You must only use safety
bonds
complying
DIN 56927, quick links
complying
with
56927,
shackles
complying with DIN EN
1677-1 and BGV C1
carbines.
The
safety
bonds,
quick
links,
shackles
and
carbines
must
00073150.DOC, Version 1.0
a
base
use
with
DIN
the
be
Werbung
Inhaltsverzeichnis
