Description Of The Device - Futurelight EYE-190 ZOOM Bedienungsanleitung

For overhead use (mounting height >100 cm), always fix the fixture with an appropriate safety-rope. Fix the
safety-rope at the correct fixation points only. The safety-rope must never be fixed at the transport handles!
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly
fastened.
The maximum ambient temperature T = 45° C must never be exceeded.
a
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, crash etc.

DESCRIPTION OF THE DEVICE

Features
Moving Head Wash with with 10 W QCLs
• Equipped with 19 quadcolor LEDs in the colors red, green, blue and white
• With integrated wireless receiver for W-DMX operation
• Supports RDM (Remote Device Management)
• 20, 32 or 42 DMX channels selectable
• Exact positioning via 16-bit Pan/Tilt movement resolution
• PAN angle switchable between 630° and 540°
• Stepless RGBW color changing
• 19 LEDs in 3 LED groups independently controllable
• Programmable color change speed and strobe effect
• Strobe effect with 1-18 flashes per second
• Random strobe effect
• Motorized zoom with 13°-27° beam angle
• Masterdimmer
• Color presets
• Color macros
• Chase patterns
• Automatic position correction
• DMX-controlled operation or stand-alone operation with Master/Slave function
• Sound-controlled via built-in microphone
• ESDC function (Easy Service Data Check) with battery-buffered Control Board for operation time readouts
etc.
• Control board with graphic LCD display and touch keyboard for adjusting the DMX-starting address,
PAN/TILT reverse, program, reset, operating hours
• RDMX (Remote DMX Adressing): DMX address setting via controller possible
• 7 built-in programs can be called up via DMX controller
• 56 preprogrammed scenes in Program Run for stand-alone operation
• Number of scenes in Program Run can be changed individually
• The scenes in Program Run can be modified via the Control Board or via an external controller and loaded
into the memory
• Software upload by optional accessory via DMX link
• Switch-mode power supply
• Automatic power supply adaption between 100 and 240 Volts without power selector
• Power connection via Neutrik PowerCon jack and included power cable
• DMX control via every standard DMX controller
34/56 00073150.DOC, Version 1.0