Breitling TRANSOCEAN CHRONOGRAPH QP Bedienungsanleitung Seite 12

CORRECTING AND SETTING MECHANICAL FUNCTIONS
Functions other than the time are effected by pressing with
a slightly blunt point (like a ballpoint tip) on the watch's
recessed correctors as follows:
1. Moonphases: Press on the D corrector to position the
moon in its current phase.
2. Date: Press on the F corrector and position the hand on
the digit 1.
3. Month and year: Press on the G corrector to adjust
the month and, if necessary, the year. For example, for
the year 2005, which follows a leap year (bissextile),
the hand must be placed in the sector 1 of the year area.
18
CORRECTING AND SETTING MECHANICAL FUNCTIONS
4. Season: Press on the H corrector to bring the season hand to the mark pre-
ceding the current season, then adjust the hand as follows:
January: 0 pressure
March: 4 pressures
May: 2 pressures
July: 0 pressure
September: 4 pressures
November: 2 pressures
5. Date: Press on the F corrector to position the hand on
the exact date.
6. Day: Press on the F corrector to position the hand on
the exact day.
7. Week: Press on the I corrector to position the hand on
the exact week.
If the watch is not worn on the wrist, it must absolutely be placed in its rewinding
box so as to keep its various functions current.
February: 2 pressures
April: 0 pressure
June: 4 pressures
August: 2 pressures
October: 0 pressure
December: 4 pressures
19