Parkside PHKS 1400 Bedienungs- Und Sicherheitshinweise Seite 8

For sawing natural wood, chipboard, plastic and aluminium
Dear Customer! We are delighted that you have decided to purchase our high quality PHKS 1400 circular saw. Please make sure you
familiarise yourself fully with the way the equipment works before you use it for the first time and that you understand how to handle
electrical power tools correctly. Please read the instructions
this you will be able to work in complete safety and achieve better results.
FEATURES OF THE PHKS 1400
ON - OFF switch
Safety switch
Electronic speed control
Adjustable depth stop
Sawdust outlet
Bevel cutting capacity with angle gauge
TECHNICAL INFORMATION
Nom. power consumption:
No load speed:
Blade:
Cutting depth at 90°:
Cutting depth at 45°:
SPECIFIC SAFETY ADVICE
To be read in conjunction with the advice in the accompanying booklet on safety.
Before starting any work on the machine, e.g. setting the guide plate etc., always take the plug out of the socket.
Never remove chips or splinters while the equipment is operating - always remove the plug from the socket first.
Always wear ear defenders and eye protection when working with the circular saw. In addition we recommend wearing safety gloves,
robust anti-slip footwear and an industrial apron.
Check the circular saw, power cable and plug for damage before every use. Always have any damaged parts repaired or replaced
at a specialist repair centre.
Always keep the power cable well out of the saw's working area and feed the cable from the rear of the machine.
If you are working for long periods on wood or materials that give rise to a lot of dust, fit the saw with a suitable tested vacuum
extraction device.
Always use the saw's integrated safety devices, e.g. the safety switch and the retractable guard.
Check to see that the retractable guard moves freely before every use.
Do not drill into the saw housing as that will interfere with the protective insulation (Use stick-on labels, plates etc.).
Persons under the age of 16 are not to use this equipment.
CIRCULAR SAW PHKS 1400
1400 W
1800 - 5200 rpm
210 x 30 x 1.8 x 2.6 mm The A weighted noise level of the equipment is typically:
0 - 75 mm Sound pressure level: 107.5 dB(A) · Sound power level 120.5 dB(A)
0 - 48 mm Hand/arm vibration is typically less than 9.3 m/s
!
below and the accompanying safety advice
Guide plate
Parallel guide fence with millimetre scale
Retractable guard
Tips for use
Depth of cut gauge
Wing nut on parallel guide fence
Nom. voltage:
Weight:
8
carefully. By doing
!
230 V ~ 50 Hz
7.1 kg
2