Troubleshooting - Megasat Countryman GPS plus Bedienungsanleitung

5. Troubleshooting

There are a number of common issues that can affect the signal reception quality or
the operation of the antenna. The following sections address these issues and potential
solutions.
A. No function when power on the controller
1. Check again all the cable connections have been made correctly.
• Connection between the power and controller.
• Connection between the controller and antenna.
2. Check if the power input cable has been damaged.
3. Check the battery polarities (+/-).
B. Fail to search the selected satellite
1. Satellite signals can be blocked or degraded by buildings, trees. Make sure there are
no obstructions in a southward direction.
2. Turn the unit off and then back on again and select desired satellite.
3. Switch the control unit off and on again. Select the desired satellite again.
C. Mechanical problems
1. If the antenna does not move into desired position.
• Try to power OFF/ON again.
2. If the antenna makes a noise whilst remaining static.
• Try to power OFF/ON again. If problem persists, please contact local dealer/
shop for assistance.
D. Other issues
1. If the system has been improperly wired, it will not operate properly. Contact
local dealer/shop for assistance of cable damage.
10
ENGLISH