Back To Home Position & Turning Off; Auto-Diseqc-Function - Megasat Countryman GPS plus Bedienungsanleitung

4. Startup and operation
4.3 Back to HOME position & Turning off
AUTOMATIC
1. If the vehicle travels 25 km/h or faster for at least 20 seconds, the antenna moves back
to the HOME position.
2. When the ignition cable is connected and the ignition key is turned, the antenna
moves back to the HOME position.
MANUAL
1. If you do not want to use the antenna, press the HOME button. The antenna returns to
the HOME position and switches off automatically after approx. 30 seconds.
2. While the antenna is moving to the HOME position, the HOME LED flashes. When the
antenna is in the HOME position, the HOME LED is lit continuously.

4.4 Auto-DiSEqC-Function

You can make settings in your receiver or TV DiSEqC. This has
the advantage that the antenna automatically aligns itself with
another satellite. Change to the channel list of your receiver, For
example, from Astra to Hotbird, the antenna is automatically di-
rected to the satellite.
1. The settings for the DiSEqC function are switched off by de-
fault.
2. To activate the function, make sure that the antenna is in the
HOME position. Then press the DiSEqC button for 2 seconds.
The DiSEqC LED lights up.
3. So that the antenna switch automatically, you must assign in
your receiver the correct DiSEqC settings. Use the table to assign the respective satel-
lites accordingly.
Note:
If the antenna is not in the HOME position, press the
SET button to activate the DiSEqC function.
ENGLISH
LNB Satellit
LNB 1 Turksat
LNB 2 ASTRA2
LNB 3 ASTRA3
LNB 4 ASTRA1
LNB 5 Hot Bird
LNB 6 Etelsat 9
LNB 7 ASTRA 4
LNB 8 Thor
LNB 9 Eutelsat 5W
LNB 10 Hispasat
LNB 11 USER1
LNB 12 USER2
09