Nightlight Function - Phocos CX48 Bedienungsanleitung

EN
The controller is preset to Mode 1 from the factory. Use Programming Menu 2 to change
the setting (see back page).
In case of doubts which mode to choose, consult your dealer because this has to be
evaluated depending on the battery used.
Datalogger
The CX controller provides a built-in datalogger. The datalogger gathers 1 year performance
data of your PV system, including max. and min. battery voltage, battery state of charge,
max. charging current and max. load current, etc. System performance can be easily
analyzed with these historical data, thus helping you to know your PV system better.
History data can be read and displayed by Computer. Ask you dealer for more informations.

Nightlight Function

The CX controller comes with a sophisticated nightlight function. It controls the load
output at night and is widely programmable.
There are 2 modes available:
DUSK TO DAWN and EVENING/MORNING. The mode can be selected in Programming
Menu 3.
36