Phocos CX48 Bedienungsanleitung Seite 33

EN
REMARK: place positive and negative wire close to each other to minimize electromagnetic
effects.
REMARK: Solar panels provide voltage as soon as exposed to sunlight. Mind the solar
panel manufacturer's recommendations in any case.
Connect the wires leading to the solar array with correct
polarity. To avoid any voltage on the wires, first connect
the controller, then the solar array.
Mind the recommended wire size:
2
CX48-20: min 4 mm
CX48-40: min 10 mm
To avoid voltage at the load terminal, push the button
to shut off the load output. Connect the wires leading
to the loads with correct polarity. Mind the
recommended wire size:
CX48-20: min 4 mm
CX48-40: min 10 mm
30
2
2
2