Herunterladen Inhalt Inhalt Diese Seite drucken

Battery Replacement - TESTBOY TV 430 Bedienungsanleitung

Isolationswiderstand messgerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Discharge the Tested Object
The tested object discharges through the meter. Keep the probes touched to the test points
until the abject is completely discharged.
Note:
For capacitive load, you should discharge it fully alter the measurement to avoid personal
injury.
Maintenance
This instrument is an exact unit, please maintain it carefully.
Don open the case unless you need to do so.
Before you open battery door, remove all the test leads from the jack first.
lf you don't use this meter for a long time, please take out the battery and place the meter in
dry and
ventilating place.
Don`t change the meters circuit to avoid damage.

BATTERY REPLACEMENT

When the Symbol "
" appears on the display, it shows that the battery should be replaced.
To replace the battery, remove the screws on the battery case, replace the exhausted
batteries with new batteries of the same type (1.5V, AA battery, 6 units), rejoin the cover and
reinstall the screws.
ACCESSORIES
1. Special test leads
2. Manual
3. Transport bag
DISPOSAL OF THE ARTICLE
Dear Customer, please help avoiding refuse.
If you at some point intend to dispose of this article, then please keep in mind that many of its
components consist of valuable materials, which can be recycled.
Please do not discharge it in the garbage bin, but check with your local council for recycling
facilities in your area.
GmbH
Elektrotechnische Spezialfabrik
Beim Alten Flugplatz 3, 49377 Vechta, Germany
Tel: +49(0)4441/89112-10 - Fax: +49(0)4441/84536
Internet: http://www.testboy.de - Email: info@testboy.de
13

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis