Starting, Operation - WIKA WUC-1 Serie Betriebsanleitung

6. Packaging / 7. Starting, operation
Unpack the transducer
1. Remove the transducer from the box.
2. Remove the outer protective bag and discard.
3. Carry the transducer (sealed in the inner bag), into the clean area.

7. Starting, operation

Required tools: wrench (flats 19 and 16), screw driver (0.040" to 0.060" /
1 to 1.5 mm) and a pair of scissors, allen key for WUC-16
Mechanical connection
Don't use this
wrench flat!
Use this wrench flat for
screwing in!
8
Product label (example)
P # Product No.
S # Serial No.
PIN assignment
Signal
Power Supply
Coded manufacture date
Before mounting and commissioning the
instrument, ensure you read the opera-
ting instructions!
WIKA Operating instructions / Betriebsanleitung, WUC-1x
EN