Exsys EX-6072-4K Anleitung

HARDWARE INSTALLATION
Please note the following installation instructions. Because there are large differences between the
PC's, we can give you only a general installation instructions for the EX-6072-4K. Please refer your
computer's reference manual whenever in doubt.
1. Turn off the power to your computer and any other connected peripherals.
2. Remove the mounting screws located at the rear and/or sides panels of your Computer and
gently slide the cover off.
3. Locate an available PCI-Express expansion slot and insert the card. Make sure that the card
is plugged in correctly.
4. Then attach the card with a screw to the rear panel of the computer.
5. Gently replace your computer's cover and the mounting screws.
DRIVER INSTALLATION
Windows
After completing the hardware installation, the operating system will automatically the card and
install this! If the driver should not be installed automatically, insert the driver CD into you CD-
ROM drive (eg drive D:) and then open the folder „LAN/Realtek/RTL8111B~G". Please select
the folder with your operating system and install the driver (see Picture). Follow the hardware
assistant and finish the installation. Important! Restart your PC in any case after installing the
drivers.
CHECK INSTALLED DRIVER
Open the >Device manager<. Now you should see at „Network adapters" the following new
entry's:
If you see this or a similar information the device is installed correctly.
5
AUFBAU
2 x RJ45 Anschlüsse
BESCHREIBUNG & TECHNISCHE DATEN
Die EX-6072-4K ist eine high speed Gigabit Ethernet PCI-Express Karte. Sie ist mit zwei exter-
nen Ports ausgestattet. Die Ports an der EX-6072-4K sind mit einer 4KV Surge Protection
ausgestattet. Sie unterstützt alle PCI-Express Slots von x1 bis x16. Der serielle PCI-Express
Bus unterstützt optimal die Leistung des schnellen Realtek Chipsatz. Die EX-6072-4K gewähr-
leistet so eine sichere Datenübertragung und exzellente Performance von bis zu 1Gbit! Im
Lieferumfang ist zusätzlich ein Low Profile Bügel enthalten, für den Einbau in schmale Gehäu-
se.
Kompatibilität:
Betriebssysteme:
Anschlüsse:
Lieferumfang:
Zertifikate:
ANSCHLÜSSE
RJ45 Anschluss:
6
EX-6072-4K
Anleitung
Vers. 1.0 / 20.11.17
PCI-Express x1 bis x16
Windows 98SE/ ME/ 2000/ XP/ Vista/ 7/ 8.x/ 10/ Server 20xx/ Mac/
Linux/ UNIX/ Novell
2x RJ45 Gigabit Ethernet Anschluss
EX-6072-4K, Low Profile Bügel, Treiber CD, Anleitung
RJ45 Anschluss
Pin Signal Pin Signal
1 BI_DA+ 4 BI_DC+
2 BI_DA- 5 BI_DC-
3 BI_DB+ 6 BI_DB-
1
Realtek Chipset
Pin Signal
7 BI_DD+
8 BI_DD-