Herunterladen Diese Seite drucken
MSA ALTAIR PRO Kurzanleitung

MSA ALTAIR PRO Kurzanleitung

Einkomponenten
Vorschau ausblenden Andere Handbücher für ALTAIR PRO:
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
Quick Start Guide
ALTAIR PRO Single Gas Detector
The quick start guide does not replace the operating
manual. It is imperative that this operating manual on
CD be read and observed when using the system. In
particular, the safety instructions, as well as the
information for the use and operation of the apparatus,
must be carefully read and observed.
The operating manual can also be provided as a hard
copy upon request.
1
Infrared port
2
Sensor cover
3
Acoustic alarm transmitter
4
Alarm LED
The instrument is a portable gas meter for monitoring toxic
gases or oxygen deficiency or excess in the workplace.
If an alarm is triggered while using the instrument, leave
the area immediately.
Remaining on site under such circumstances can cause
serious damage to health or can even lead to death.
The instrument can detect up to 25% oxygen in the
ambient air. However, all instrument models are calibrated
and permitted only up to 21% oxygen-content.
GB
1
2
3
5
Button
6
Display with backlight
7
Stipulated gas type
4
5
6
7
Order No.: 10079353/02
loading

Inhaltszusammenfassung für MSA ALTAIR PRO

  • Seite 3 Kurzanleitung Einkomponenten Gasdetektor ALTAIR PRO Die Kurzanleitung ist kein Ersatz für die Gebrauchs- anleitung. Die Gebrauchsanleitung auf beiliegender CD ist für die Nutzung des Produktes zwingend zu lesen und zu beachten. Insbesondere die darin enthaltenen Sicherheitshinweise sowie die Angaben zu Einsatz und Bedienung des Gerätes müssen aufmerksam gelesen...
  • Seite 4 Die Bedienung erfolgt ausschließlich mit dem Knopf. Einstellen der Alarmschwellen vor Inbetriebnahme (1) Gerät muss ausgeschaltet sein. (2) Batterie herausnehmen und wieder einsetzen. (3) Knopf drücken und 3 s halten. • Dabei wird ”ON” angezeigt. • ”ALARM”, ”SET” und ”?” werden angezeigt. (4) Zum Ändern der Alarmschwellen während der Anzeige von ”ALARM”, ”SET”...