Timex IRONMAN series Benutzerhandbuch Seite 3

OCCASION
Occasion mode allows you to set reminders for occasions, like birthdays,
anniversaries, holidays, and appointments... Press MODE repeatedly until
OCCASN appears...
Today's date is shown with today's occasion in top line... Press START·SPLIT
or STOP·RESET to move forward or backward through dates respectively...
Occasion for displayed date is always shown... Non-recurring occasions may be
set for dates up to one year in advance...
To set occasion:
1) Press START·SPLIT or STOP·RESET to select desired date; hold button to
scan dates...
2) Press SET·RECALL. Occasion flashes, if no occasion selected then NONE
flashes. Press + or – to change occasion... ANNIV, BDAY, BILL-YR, and
HOLI-YR repeat yearly and BILL-MO repeats monthly...
3) To set occasions for other dates, press NEXT. Date flashes. Press + or – to
change date; hold button to scan values... Occasion for displayed date is
always shown...
4) Press NEXT to set occasion for displayed date, as in step 2...
5) Press DONE at any step when done setting...
Occasion Reminders
Watch alerts you of occasions at 8:00 AM on day of occasion... You may choose
to receive no alert or an alert at a different time or day. You may choose different
alerting for each occasion type... E...g..., all birthdays may alert one day prior while
all holidays may have no alert...
To set occasion reminder alerts:
1) Go to today's date by pressing START·SPLIT or STOP·RESET to scan dates...
You may also go to today's date by simply entering Occasion mode...
2) From today's date, press STOP·RESET to go to ALERT SETUP...
3) Press SET·RECALL. Occasion type flashes. Press + or – to select occasion
type. Your settings will affect all occasions of the selected type.
4) Press NEXT. Alert status (ON/OFF) flashes. Press + or – to turn alert on or off
for selected occasion type... If OFF selected, next 4 steps are skipped...
5) Press NEXT. Alert time hour flashes. Press + or – to change hour; hold
button to scan values...
6) Press NEXT. Alert time minutes flash. Press + or – to change minutes...
7) Press NEXT. AM/PM flashes if in 12-hour time format. Press + or – to
change...
8) Press NEXT. Alert day flashes. Press + or – to set alert for 0 - 9 days prior to
occasion...
9) To set alerts for other occasion types, press NEXT. Occasion type flashes.
Select occasion type as in step 3 and continue with setting procedure...
10) Press DONE at any step when done setting...
Hand icon f appears when displayed occasion type has a reminder alert...
When alert sounds in Time mode, hand icon f flashes. Press any button to
silence... See Time mode for instructions on viewing upcoming occasions...
TIP: For reminder at end of every month, set BILL-MO for first of month and alert
one day prior...
ALARM
The watch has three alarms... Press MODE repeatedly until ALM 1, ALM 2, or
ALM 3 appears...
To set alarm:
1) Press SET·RECALL. Hour flashes. Press + or – to change hour; hold button
to scan values...
2) Press NEXT. Minutes flash. Press + or – to change minutes...
3) Press NEXT. AM/PM flashes if in 12-hour time format. Press + or – to
change...
4) Press NEXT. Alarm day setting flashes. Press + or – to select DAILY,
WKDAYS, or WKENDS...
5) Press DONE at any step when done setting...
To turn alarm on/off, press START·SPLIT...
Alarm clock icon a appears when alarm is on in this mode and in Time mode...
When alarm sounds, night-light flashes. Press any button to silence. If no button
is pressed, alarm will sound for 20 seconds and repeat once five minutes later.
Each of the three alarms has a different alert melody.
INDIGLO NIGHT-LIGHT WITH NIGHT-MODE
®
Press INDIGLO button to illuminate watch display for 2 - 3 seconds (5 - 6
®
seconds while setting)... Electroluminescent technology used in the INDIGLO
night-light illuminates entire watch face at night and in low light conditions... Any
button pressed while INDIGLO
Press and hold INDIGLO button for 4 seconds to activate NIGHT-MODE
®
feature... Moon icon P will appear in Time mode... Feature causes any button press
to activate INDIGLO night-light for 3 seconds... NIGHT-MODE
®
deactivated by pressing and holding INDIGLO
automatically deactivates after 8 hours...
WATER AND SHOCK RESISTANCE
If your watch is water-resistant, meter marking or (O) is indicated
Water-Resistance Depth
30m/98ft
50m/164ft
100m/328ft
*pounds per square inch absolute
WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY
BUTTONS UNDER WATER.
1... Watch is water-resistant only as long as lens, push buttons and case remain
intact...
2... Watch is not a diver watch and should not be used for diving...
3... Rinse watch with fresh water after exposure to salt water...
4... Shock-resistance will be indicated on watch face or caseback... Watches are
designed to pass ISO test for shock-resistance... However, care should be
taken to avoid damaging crystal/lens...
BATTERY
Timex strongly recommends that a retailer or jeweler replace battery... If
applicable, push reset button when replacing battery... Battery type is indicated
on caseback... Battery life esti-mates are based on certain assumptions regarding
usage; battery life may vary depending on actual usage...
DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT RECHARGE. KEEP
LOOSE BATTERIES AWAY FROM CHILDREN.
TIMEX INTERNATIONAL WARRANTY
http://www...timex...com/productWarranty...html
©2018 Timex Group USA, Inc... TIMEX, INDIGLO and NIGHT-MODE are
registered trademarks of Timex Group B...V... and its subsidiaries...
For more brand information please visit
IRONMAN and the "M-DOT" logo are registered trademarks of World Triathlon
®
Corporation. Official Product of the IRONMAN TRIATHLON. Used here by
permission...
2
ENGLISH
night-light is on keeps it on...
®
®
button again for 4 seconds, or it
®
p.s.i.a. * Water Pressure Below Surface
60
86
160
www...ironman...com
170-095004
FEATURE
®
®
®
feature may be