Cleaning And Maintenance - Waeco CoolMatic MR07 Bedienungsanleitung

CoolMatic MR07, MRR07, MH07
Switching off and storing the device
If you do not intend to use the device for a prolonged period, proceed as fol-
lows:
➤ Disconnect the connecting cable from the battery.
➤ Clean the device (see chapter "Cleaning and maintenance" on page 33).
➤ Set the lock to the "VENT" position (see chapter "Removing the transport
protection" on page 29).
This prevents odours from forming.
Securing the cabinet door
You can prevent the cabinet door from being opened inadvertently.
➤ Put the locking mechanism on the top of the door to position 1 (fig. 6 1,
page 5).
8

Cleaning and maintenance

A
NOTICE!
Do not use abrasive cleaning agents or hard objects during clean-
ing as these can damage the device.
➤ Clean the device regularly with a damp cloth once it becomes dirty.
➤ Make sure that no water drips into the seals. This can damage the elec-
tronics.
➤ If necessary, wipe up the condensation that has gathered on the floor.
➤ Wipe the device dry with a cloth after cleaning.
EN
Cleaning and maintenance
33