Home Connect; Setting Up Home Connect - Gaggenau RB282 Gebrauchsanleitung

Home Connect

en
Home Connect
o
T his appliance is Wi-Fi-capable and can be remotely
H o m e C o n n e c t
controlled using a mobile device.
Note: Wi-Fi is a registered trade mark of the Wi-Fi
Alliance.
In the following cases, the appliance functions like a
refrigerator without a network connection and can still
be manually operated via the controls:
▯
The appliance is not connected to a home network.
▯
Home Connect service is not available in the
country in which the appliance is set up. For an
overview of the countries in which Home Connect is
available, see www.home-connect.com.
Note: Please observe the safety information in this
instruction manual. Ensure that this is also adhered to if
you operate the appliance via the Home Connect app
and are not at home when doing so.
"Safety instructions" on page 27
~
Follow the instructions in the Home Connect app as
well.

Setting up Home Connect

Notes
– Observe the Home Connect supplementary sheet,
which is available for download under
www.gaggenau.com with the instructions. To do so,
enter the E-number of your appliance in the search
field.
– After switching on the appliance, wait at least two
minutes until internal device initialisation is
complete. Only then start setting up Home
Connect.
– To implement settings with Home Connect, the
Home Connect app must be installed on your
mobile device.
Observe the supplied Home Connect documents
for this.
Follow the steps specified by the app to implement
the settings.
– The Home Connect menu will close automatically
when the appliance is not operated for a lengthy
period of time. You can find information on how to
open the Home Connect menu at the start of the
appropriate sections.
38
Automatic connection with the home network (WLAN)
If a WLAN router with WPS function is available, the
refrigerator can automatically connect to the home
network.
·
1 Press the button.
The refrigerator compartment temperature display
shows Cn.
2 Press button -/+ refrigerator compartment until the
refrigerator compartment temperature display
shows AC and the freezer compartment
temperature display shows OF.
3 Press button -/+ freezer compartment.
The appliance is ready for the automatic
connection.
Freezer compartment temperature display shows an
animation for 2 minutes.
The appliance is ready for the automatic connection
for as long as the animation is displayed.
4 Within those 2 minutes, activate the WPS function
on the home network router (e.g. using the WPS/
WLAN button; observe information on this topic in
the router documentation).
If the connection is successful, On flashes up in the
freezer compartment temperature display.
The refrigerator is ready to connect with the app.
Note: If the freezer compartment temperature display
shows OF, no connection could be established.
1 Check whether the refrigerator is located within the
range of the home network (WLAN).
2 Repeat the process or establish the connection
manually.