Omnitronic MX-540 Bedienungsanleitung Seite 22

5. INSTALLATION
5.1 Rack installation
Install the unit on a plane surface or in your rack. For 19" (483 mm) rack installation, 5 units are required.
When mounting the unit into the rack, please make sure that there is enough space around the device so
that the heated air can be passed on. Steady overheating will damage your device. You can fix the unit with
four screws M6 in the rack.
5.2 Connections
Switch off the mixer prior to connecting any units or to changing any existing connections.
1 Connect the stereo audio sources to the corresponding RCA jacks of channels 1-5 (white jack = left; red
jack = right):
• Connect units with line level output (e.g. CD players) to the jacks LINE.
• Connect turntables with magnetic system to the jacks PH/LINE.
• If your turntable is equipped with a separate ground lead, connect it to the corresponding clamping
screw GND.
22/27 00041735.DOC, Version 2.0