Electrolux IG1235SN Benutzerinformation Seite 55

It is possible to change predefined sound
of buttons to a loudly one by pressing
together Mode and temperature colder
3.2 Display
A
F
3.3 Switching on
Connect the mains plug to the power
socket
1. Press the ON/OFF if the display is off.
The temperature indicators show the set
default temperature.
2. The alarm buzzer may sound after a
few seconds.
To reset the alarm refer to "High
temperature alarm".
If "DEMO" appears on the display, the
appliance is in demonstration mode.
Refer to "Troubleshooting...".
To select a different set
temperature refer to
"Temperature regulation".
3.4 Switching off
Press ON/OFF for 3 seconds.
The display switches off.
To disconnect the appliance from the
power, disconnect the mains plug from
the power socket.
3.5 Temperature regulation
The set temperature of the freezer may be
adjusted by pressing the temperature
button.
Default temperature:
• -18°C for the freezer
The temperature indicator shows the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
B C
E D
button for some seconds. Change is
reversible.
A) Timer indicator
B) FastFreeze function
C) Temperature indicator
D) Alarm indicator
E) ChildLock function
F) DrinksChill function
3.6 FastFreeze function
To switch on the FastFreeze function :
1. Press Mode button until the
corresponding icon appears.
The FastFreeze indicator flashes.
2. Press OK button to confirm.
The FastFreeze indicator is shown.
The FastFreeze function
stops automatically after 52
hours.
To deactivate the FastFreeze
press Mode in order to select
an other function or repeat
the procedure until the
FastFreeze indicator goes off.
3.7 ChildLock function
Activate the ChildLock function to lock the
buttons from unintentional operation.
1. Press Mode until the corresponding
icon appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown.
To deactivate the ChildLock
function, repeat the
procedure until the ChildLock
indicator goes off.
3.8 DrinksChill function
The DrinksChill function is to be used to
set an acoustic alarm at the preferred
time, useful for example when a recipe
requires to cool down a mixture for a
ENGLISH 55