Download The App - Nibe SMS 40 Installateurhandbuch

Quick start guide
Program setting of SMS 40 can be performed via the start
guide or directly in the menu system.
1. Start the heat pump/indoor module and select SMS
40 in menu 5.2 "system settings" (menu 5.2.4 "ac-
cessories" for NIBE F1345 and VVM500).
2. Go to menu 4.1.4 in your heat pump/indoor module
(menu 5.3.5 if your heat pump/indoor module has
software version 2041 or earlier) and add the mobile
numbers that are to have access to change and re-
ceive status information from the heat pump/indoor
module. Mobile numbers must include country code
e.g. +46 XXXXXXXX.
3. If you want to receive an SMS message in the event
of the alarm mark the box to the right of the tele-
phone number.
NOTE
Telephone numbers provided must be able to
receive SMS messages.

Download the app

If the mobile telephone also has the Android operating
system the "NIBE Mobile App" can be used. In the event
of an alarm, SMS 40 can send an SMS to the programmed
recipient and present it graphically.
1. Go into Android Market
2. Search on NIBE
3. Download
Or scan in the qr code below using your android tele-
phone.
(requires scanner software in the phone).
GB
13