Operation; Stand-Alone Mode - EuroLite LED IP PAR 3x12W HCL Bedienungsanleitung

OPERATION

After you connected the effect to the mains, the LED IP PAR 3x12W HCL starts running.
The LED display lights up and you can now choose the desired settings via the buttons MENU, UP, DOWN
and ENTER.
The device has two operating modes. It can be operated in stand-alone mode or in DMX-controlled mode via
any standard DMX controller.

Stand-alone Mode

In the stand-alone mode, the LED IP PAR 3x12W HCL can be used without DMX-controller. Disconnect the
LED IP PAR 3x12W HCL from the DMX-controller.
30/40 00095351.DOC, Version 1.1