Carina Professional Bedienungsanleitung Seite 45

Darning stitch
2mm
23
Position the fabric so that the needle is 2mm
(1/16 inch) in front of the area to be darned, and
then lower the presser foot lever.
Please Note:
foot, do not push in the front of the presser
foot, otherwise the darning will not be sewn
with the correct size.
Pass the upper thread down through the
hole in the presser foot.
Pull down the buttonhole lever. The buttonhole
lever is positioned behind the bracket on the
buttonhole foot.
Gently hold the end of the upper thread in your
left hand, and then start sewing.
Darning stitches are sewn from the front of the
presser foot to the back, as shown.
If the sewing range is too big to sew, then we
suggest you can sew several times (or cross sew)
to get better sewing result.
41
When lowering the presser