Maintenance And Care - Monuments STEEL Montage- Und Gebrauchsanweisung

Maintenance and care

All sauna heating units are made of low-cor-
rosion material. To enjoy your sauna heat-
ing unit for a long time you should ensure
maintenance and take due care about the
heater. Always make sure that the air supply
vents and reflection surfaces in the area of
air intake are free. These can easily become
clogged with fuzz and dust when drawing in
fresh air. This reduces the air convection in
the sauna heating unit and can be a cause
of too high temperatures.
Clean or de-scale the heater when need-
ed. Refer to your sauna supplier or directly
to the manufacturer in case of defects or
signs of wear and tear.
Only use original manufacturer's replace-
ment parts, which can be obtained from
your supplier or directly from the manufac-
turer.
If you did not use your sauna for a long pe-
riod of time, always check before next use
that cloths, cleansers or other objects have
not been left on the sauna heating unit or
the vaporizer before turning them on.
EN
32