Sauna Heater Installation; Minimum Clearances - Monuments STEEL Montage- Und Gebrauchsanweisung

Sauna heater installation

The sauna heater has been designed for a connection voltage of 400 V AC 3N via a sauna
control unit.

Minimum clearances

• The inner sauna cabin height must be at least 190 cm.
• The clearance between the upper edge of the heater and the cabin ceiling must be at least
90 cm, but may not be more than 110 cm.
• The side (horizontal) gaps between the heater and the cabin wall or the guard rail, bench
and other flammable materials are stated in Fig. 1.
4
cm
• The height of the safety guard rail for the heater must approximately correspond to the
front height of the heater (Fig. 2).
Cabin wall
Protective gra-
ting for heater
40
cm
EN
4
cm
Fig. 1
Fig. 2
27