Epson TM-P60II Benutzerhandbuch Seite 19

Power supply voltage
Power consumption
Charging time for battery
Temperature
/humidity
Overall dimensions
Weight (Mass)
*: Lithium-ion battery: Product name: OT-BY60II, Trade name: Seiko Epson Corporation
For the battery specifications, see its User's Manual.
Open Source Software License
1. This product includes open source software programs listed in Section 4)
according to the license terms of each open source software program.
2. We provide the source code of the GPL Programs and LGPL Programs (each
is defined in Section 4) to you on a CD-ROM for a charge covering the cost of
performing such distribution, such as the cost of media, shipping and
handling until five (5) years after the discontinuation of same model of this
product. If you desire to receive the source code above, please contact the
customer support for your region.
3. The open source software programs are WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. See the license agreements of each open
source software program for more details, which are described on "OPEN
SOURCE SOFTWARE LICENSE TERMS" in this documentation.
4. The list of open source software programs included with this printer product
and the whole license agreements of each license can be found in the
following URL.
http://xxx.xxx.xxx.xxx/licenses/
* For the underlined part in the above URL, input each printer's IP address.
During battery
charge
During operation
During storage
Input voltage: Either max. 1.0 A at DC12 V,
or max. 1.5 A at DC 24V
(When using the optional AC adapter EPSON PS-11
[Model: M235A]) Output voltage: 1.5 A at DC 24V,
Input voltage: AC 100V to 240 V
• Stand-by: (0.25W)/230V (when using PS-11)
• Charging: (15W)/230W (when using PS-11)
Approx. 2.5 hours
*To charge a new battery fully from 0% at normal
temperature when the printer is Off
0 to 40°C {32 to 104°F}, 10 to 90% RH
• When using battery only: 0 to 45°C {32 to 113°F},
10 to 90% RH
• When using battery and PS-11: 0 to 40°C
{32 to 104°F}, 10 to 90% RH
Abnormal operations not found when the printer is left
under the environment of 25°C {77°F}, 60% RH for 2
hours after it was left in the following conditions:
• High temperature and humidity: 45°C {113°F},
90%RH
• High temperature: 70°C {158°F} for 120 hours
• Low temperature: -25°C {-13°F} for 120 hours
103 × 159 × 65 mm {4.1 × 6.3 × 2.6"} (W × D × H)
Approx. 613 g {1.35 lb}
(including battery and belt clip, excluding roll paper)
TM-P60II with Peeler User's Manual 19