Service; Specific Safety Information; Micro Ca-150 Inspection Camera Safety - RIDGID micro CA-150 Bedienungsanleitung

• Do not use equipment if the switch does
not turn it ON and OFF. Any tool that can-
not be controlled with the switch is dan-
gerous and must be repaired.
• Disconnect the batteries from the e quip -
ment before making any adjustments,
changing accessories, or storing. Such
preventive safety measures reduce the risk
of injury.
• Store idle equipment out of the reach of
children and do not allow persons unfa-
miliar with the equipment or these in-
structions to operate the equipment.
Equipment can be dangerous in the hands
of untrained users.
• Maintain equipment. Check for misalign-
ment or binding of moving parts, missing
parts, breakage of parts and any other
condition that may affect the equipment's
operation. If damaged, have the equipment
repaired before use. Many accidents are
caused by poorly maintained equipment.
• Use the equipment and accessories in
accordance with these instructions,
taking into account the working condi-
tions and the work to be performed.
Use of the equipment for operations differ-
ent from those intended could result in a
hazardous situation.
• Use only accessories that are recom-
mended by the manufacturer for your
equipment. Accessories that may be suit-
able for one piece of equipment may be-
come hazardous when used with other
equipment.
• Keep handles dry and clean; free from
oil and grease. Allows for better control of
the equipment.

Service

• Have your equipment serviced by a
qual i fied repair person using on ly iden-
tical replacement parts. This will ensure
that the safety of the tool is maintained.
Specific Safety
Information
WARNING
This section contains important safety in-
formation that is specific to the inspec-
tion camera.
Read these precautions carefully before
using the micro CA-150 In spec tion Cam -
micro CA-150 Inspection Camera
era to reduce the risk of electrical shock
or other serious injury.
SAVE THESE INSTRUCTIONS!
A manual holder is supplied in the carrying
case of the micro CA-150 Inspection Camera
to keep this manual with the tool for use by
the operator.
micro CA-150 Inspection
Camera Safety
• The micro CA-150 imager head and ca -
ble are waterproof to 10'. The hand-held
display unit is not. Do not expose the
display unit to water or rain. This increases
the risk of electrical shock.
• Do not place the micro CA-150 Inspec-
tion Cam era anywhere that may con-
tain a live electrical charge. This in-
creases the risk of electrical shock.
• Do not place the micro CA-150 Inspec-
tion Cam era anywhere that may con-
tain moving parts. This increases the risk
of entanglement injuries.
• Do not use this device for personal in-
spection or medical use in any way.
This is not a medical device. This could
cause personal injury.
• Always use appropriate personal pro-
tective equipment while handling and
using the micro CA-150 Inspection Cam -
era. Drains and other areas may contain
chemicals, bacteria and other substances
that may be toxic, infectious, cause burns or
other issues. Appropriate personal pro-
tective equipment always includes safe -
ty glasses and gloves, and may include
equipment such as latex or rubber gloves,
face shields, goggles, protective clothing,
respirators and steel-toed footwear.
• Practice good hygiene. Use hot, soapy
wa ter to wash hands and other exposed
body parts exposed to drain contents after
handling or using the micro CA-150 In -
spec tion Camera to inspect drains and
other areas that may contain chemicals
or bacteria. Do not eat or smoke while op-
erating or handling the micro CA-150
Inspection Camera. This will help prevent
contamination with toxic or infectious mate-
rial.
• Do not operate the micro CA-150 In -
spection Camera if operator or device is
standing in water. Operating an electrical
3