Equipment Use And Care; Service; Specific Safety Information; Micro Ca-100 Inspection Camera Safety - RIDGID micro CA-100 Bedienungsanleitung

micro CA-100 Inspection Camera
Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat or hearing protec-
tion used for appropriate conditions will
reduce personal injuries.

Equipment Use and Care

Do not force equipment. Use the cor-
rect equipment for your application.
The correct equipment will do the job
better and safer at the rate for which it is
designed.
Do not use equipment if the switch
does not turn it ON and OFF. Any tool
that cannot be controlled with the switch
is dangerous and must be repaired.
Disconnect the batteries from the
equipment before making any adjust-
ments, changing accessories, or stor-
ing. Such preventive safety measures
reduce the risk of injury.
Store idle equipment out of the reach
of children and do not allow per-
sons unfamiliar with the equipment
or these instructions to operate the
equipment. Equipment can be danger-
ous in the hands of untrained users.
Maintain equipment. Check for mis-
alignment or binding of moving parts,
missing parts, breakage of parts and
any other condition that may affect the
equipment's operation. If damaged,
have the equipment repaired before use.
Many accidents are caused by poorly
maintained equipment.
Use the equipment and accessories in
accordance with these instructions,
taking into account the working con-
ditions and the work to be performed.
Use of the equipment for operations dif-
ferent from those intended could result
in a hazardous situation.
Use only accessories that are recom-
mended by the manufacturer for
your equipment. Accessories that may
be suitable for one piece of equipment
may become hazardous when used with
other equipment.
Keep handles dry and clean; free from
oil and grease. Allows for better control
of the equipment.
4

Service

Have your equipment serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the tool is main-
tained.
Specific Safety Information
WARNING
This section contains important safety in-
formation that is specific to the inspection
camera.
Read these precautions carefully before us-
ing the micro CA-100 Inspection Camera to
reduce the risk of electrical shock or other
serious injury.
SAVE THESE INSTRUCTIONS!
A manual holder is supplied in the carrying
case of the micro CA-100 Inspection Camera
to keep this manual with the tool for use by
the operator.
micro CA-100 Inspection Camera
Safety
The micro CA-100 imager head and
cable are waterproof to 10' . The hand-
held display unit is not. Do not expose
the display unit to water or rain. This in-
creases the risk of electrical shock.
Do not place the micro CA-100 In-
spection Camera anywhere that may
contain a live electrical charge. This
increases the risk of electrical shock.
Do not place the micro CA-100 Inspec-
tion Camera anywhere that may con-
tain moving parts. This increases the
risk of entanglement injuries.
Do not use this device for personal
inspection or medical use in any way.
This is not a medical device. This could
cause personal injury.
Always use appropriate personal pro-
tective equipment while handling and
using the micro CA-100 Inspection
Camera. Drains and other areas may
contain chemicals, bacteria and other
substances that may be toxic, infectious,
cause burns or other issues. Appropri-
ate personal protective equipment
always includes safety glasses and
gloves, and may include equipment
such as latex or rubber gloves, face