Component Positions; Electrical Components - Nibe SOLAR 42 Installateurhandbuch

GB
English, Installer manual - SOLAR 42
General
This accessory is used when F1145 is installed together
with solar heating.
Caution
This accessory may require a program software
update in your F1145.
1031 or higher is the minimum software version
for the pump.
Caution
The water from the solar panel can reach high
temperatures. The hot water side must be sup-
plied with a mixing valve.
Contents
4 x Cable ties
1 x Unit box (comprising AA5, FA1 and X1).
2 x Heating pipe paste
1 x Aluminium tape
1 x Insulation tape
1 x Temperature sensor (BT54), black
1 x Temperature sensor, high temp (BT53), trans-
parent
8

Component positions

AA5-S2
AA5-X4
AA5 AA5-X2 AA5-F1

Electrical components

FA1 Miniature circuit-breaker
X1 Terminal block, power supply
AA5 Accessory card
AA5-X2 Terminal block, sensors and external bloc-
king
AA5-X4 Terminal block, communication
AA5-X9 Terminal block, circulation pump, mixing
valve and auxiliary relay
AA5-S2 DIP switch
AA5-F1 Fine-wire fuse
Designations in component locations according to
standard IEC 81346-1 and 81346-2.
FA1
AA5-X9 X1