Network Connection; Compactflash Slot (Only Device Version With Acc) - Feig Electronic OBID ID ISC.LRU2000 Montageanleitung

®
OBID i-scan

2.9.3 Network connection

2.9.3.1 LAN (only device versions with ACC)
The Reader has an integrated 10/100Tbase network port for an RJ45. Connection is made on X11.
With structured cabling Cat 5 cables should be used. This ensure reliable operation at 10Mbps or
100Mbps.
Pin configuration for X8 (network interface):
Terminal Abbreviation
1
2
3
4
5
6
7
8
Table 2-13: Ethernet interface pin-outs
2.9.4 CompactFlash Slot
The Reader has a CF2 slot (connector X12). This slot is for future use by CompactFlash cards.
FEIG ELECTRONIC GmbH
Installation
TX+ Transmit Data +
TX- Transmit Data -
RX+ Receive Data +
VETH+ n.c.
VETH+ n.c.
RX- Receive Data -
VETH- n.c.
VETH- n.c.
(only device version with ACC)
Page 48 of 56
Description
ID ISC.LRU2000
M60801-0de-ID-B.doc