Antenna Connection - Feig Electronic OBID ID ISC.LRU2000 Montageanleitung

®
OBID i-scan

2.5 Antenna connection

The external antenna is connected on the analog circuit board.
The maximum tightening torque for the SMA sockets is 0.45 Nm.
Caution:
Exceeding the tightening torque will destroy the plug.
Terminal
X1, X2
X3, X4
Table 2-4: External antenna connection
FEIG ELECTRONIC GmbH
Installation
Description
Connection for external antennas
(input impedance 50Ω)
Page 39 of 56
ID ISC.LRU2000
M60801-0de-ID-B.doc